Every year, we see cars come into Kinson MOT Centre that fail their MOT for reasons that are completely avoidable. In many cases, a quick check or simple repair beforehand would have saved time, money, and the hassle of a retest.
If you’re searching for “why did my car fail its MOT” or “common MOT failures”, this guide breaks down the 9 most common reasons cars fail their MOT, explained by our technicians here in Bournemouth – along with what you can do about each one.
If your MOT is coming up, you can book an MOT with Kinson MOT Centre, or if something does fail, we also carry out MOT repairs, including brakes and tyres, all under one roof.
1. Blown or Faulty Bulbs
This is one of the most common and frustrating MOT failures.
What we see:
- Brake lights not working
- Headlights out or too dim
- Indicators not flashing correctly
- Number plate lights failed
Why it fails:
All exterior lights must work correctly and be the correct colour. Even one blown bulb can result in an MOT failure.
How to avoid it:
Do a quick walk-around check before your MOT. Get someone to press the brake pedal while you check the rear lights, or reverse up to a wall at night to see reflections.
If you’re unsure, we’re happy to check bulbs during your MOT appointment.
2. Windscreen Washer Not Working
This one catches a lot of people out.
What we see:
- Empty washer bottle
- Washer jets blocked or misaligned
- Washer pump not working
Why it fails:
If the washer doesn’t spray enough fluid onto the windscreen to allow the wipers to clean it, the car will fail.
How to avoid it:
Top up washer fluid regularly (especially in winter). If the jets aren’t spraying, they may just need cleaning or adjusting.
3. Tyres Below Legal Limit or Damaged
Tyres are a major MOT failure point.
What we see:
- Tread below the legal 1.6mm
- Cuts or bulges in the sidewall
- Uneven wear across the tyre
- Incorrect tyre sizes fitted
Why it fails:
Tyres are your only contact with the road. Anything that affects grip or safety will result in a fail.
How to avoid it:
Use the 20p test to check tread depth and inspect sidewalls for damage. If you’re unsure, our Tyres page explains what to look for, and we can advise or replace tyres if needed.
4. Worn or Ineffective Windscreen Wipers
Another very common failure.
What we see:
- Split or perished rubber
- Wipers smearing instead of clearing
- Wipers missing sections of the screen
Why it fails:
If the wipers don’t clear the driver’s view properly, the vehicle fails.
How to avoid it:
Replace wiper blades yearly or as soon as they start streaking. They’re cheap, quick to change, and make a big difference.
5. Cracked or Damaged Windscreen
Not all windscreen damage causes an MOT failure – but some definitely do.
What we see:
- Cracks in the driver’s line of sight
- Large chips that have spread
- Damage near the edges of the screen
Why it fails:
Cracks over a certain size, especially in the driver’s viewing area, affect visibility and structural safety.
How to avoid it:
Get chips repaired early before they spread. Small repairs are often cheaper than full screen replacements.
6. Engine Management Light (EML) On
Modern cars fail MOTs for warning lights more than ever.
What we see:
- Engine management light illuminated
- Fault codes stored in the ECU
- Emissions-related issues
Why it fails:
If the engine management light is on, it usually indicates an emissions or engine fault – both are MOT fail items.
How to avoid it:
If a warning light comes on, don’t ignore it. Get the fault diagnosed before your MOT. Sometimes it’s a simple sensor issue, but leaving it can lead to bigger problems.
7. Exhaust Blowing or Excessively Noisy
Exhaust issues are very common, especially on older vehicles.
What we see:
- Blowing joints
- Rusted exhaust sections
- Loose heat shields
- Excessive exhaust noise
Why it fails:
A leaking or noisy exhaust can affect emissions and safety. Any exhaust that’s louder than expected or leaking gases will fail.
How to avoid it:
Listen for changes in exhaust noise and check underneath for rust. Exhaust repairs are often straightforward if caught early.
8. Brake Pads Worn Too Thin
Brakes are a critical MOT item.
What we see:
- Brake pads below minimum thickness
- Metal-on-metal grinding
- Discs damaged due to worn pads
Why it fails:
Brake pads that are too thin compromise stopping power and safety.
How to avoid it:
If your brakes squeal or grind, get them checked immediately. We carry out MOT brake repairs and pad replacements regularly at Kinson MOT Centre.
9. Worn Suspension Bushes
This is a big one that drivers often don’t notice.
What we see:
- Perished or cracked rubber bushes
- Excessive movement in suspension arms
- Knocking noises over bumps
Why it fails:
Suspension bushes keep the car stable and aligned. Excessive wear affects handling and tyre wear.
How to avoid it:
If you hear knocking over bumps or feel vague steering, get it checked. Suspension issues often get worse gradually, so early repair is key.
Book Your MOT with Confidence at Kinson MOT Centre
Most MOT failures are minor, repairable, and preventable. A quick check before your test can make all the difference.
At Kinson MOT Centre, we:
- Carry out fair, honest MOT testing
- Offer MOT repairs if anything fails
- Handle tyres, brakes, lights, and suspension in-house
- Try our best to fit you in quickly
You can:
- Book an MOT online
- Visit our MOT page for full details
- Arrange MOT repairs if needed
- Check tyres via our Tyres page
If your MOT is coming up and you want it done properly, locally, and without stress – book your MOT with Kinson MOT Centre today.