If your car pulls to the left or right, it’s not something you should ignore. At Kinson MOT Centre, this is a very common issue we see from drivers across Bournemouth and Kinson – and it’s often a sign of a safety or maintenance problem. Get your car booked in!
Sometimes the fix is simple. Other times, it’s an early warning of something that could cause an MOT failure or lead to more expensive repairs if left too long.
Here’s a clear, technician-led guide to what causes a car to pull and what to do next.
First Question: When Does It Pull?
This is the most important clue.
Ask yourself:
- Does it pull all the time?
- Only when braking?
- Only at higher speeds?
- After hitting a pothole or kerb?
Each points to a different cause.
1. Car Pulls All the Time (Most Common Causes)
Uneven Tyre Pressure
This is the number one cause we see.
What’s happening:
- One tyre has lower pressure than the others
- The car naturally drifts towards the softer tyre
Why it matters:
- Affects handling and braking
- Increases tyre wear
- Can cause MOT advisories or failures
What to do:
Check and correct tyre pressures on all four wheels. If the problem disappears, you’ve found the cause.
Tyre Wear or Mismatched Tyres
Even with correct pressures, tyres can still cause pulling.
Common issues:
- Uneven tread wear
- Different tyre brands or tread patterns
- One tyre significantly more worn than the others
Why it matters:
Tyres with different grip levels will pull the car toward the side with less resistance.
This is especially common after fitting just one new tyre.
2. Car Pulls After Hitting a Pothole or Kerb
Wheel Alignment Issues
This is extremely common on local roads.
What’s happening:
- The wheels are no longer pointing straight
- Steering geometry is out of alignment
Signs:
- Steering wheel isn’t straight
- Car drifts when you release the wheel
- Tyres wearing unevenly
Why it matters:
Poor alignment affects stability, tyre life, and fuel economy. Left untreated, it often leads to suspension wear and MOT failures.
3. Car Pulls Only When Braking
This is a big warning sign.
Sticking Brake Caliper or Uneven Brakes
If the car pulls when you press the brake pedal, the braking force isn’t equal on both sides.
Common causes:
- Sticking brake caliper
- Uneven brake pad wear
- Contaminated brake components
- Warped brake discs
Why it matters:
This affects stopping distance and control, especially in emergency braking.
This is always worth checking immediately.
4. Suspension or Steering Wear
If the car pulls and feels unstable, suspension or steering components may be worn.
Common culprits:
- Worn suspension bushes
- Ball joints with play
- Track rod ends worn
- Damaged control arms
Why it matters:
These components keep the wheels aligned and stable. Wear here:
- Causes pulling
- Affects handling
- Will often fail an MOT
Suspension wear usually worsens gradually, so early inspection saves money.
5. Brake Issues You Might Not Notice Yet
Sometimes the pull is subtle at first.
Hidden brake issues include:
- One brake doing more work than the other
- Corrosion on discs
- Pads binding on one side
Even if there’s no noise yet, uneven braking can still cause pulling.
Is It Safe to Drive If My Car Pulls?
Short answer: sometimes – but it depends on why.
You should get it checked urgently if:
- The pull happens during braking
- The car feels unstable
- The steering wheel isn’t centred
- Tyres are wearing unevenly
- There are knocking or clunking noises
Driving with a pulling issue increases tyre wear, brake wear, and can compromise safety.
Will a Pulling Car Fail an MOT?
Yes – very often.
Common MOT failure reasons linked to pulling:
- Worn suspension bushes
- Excessive play in steering components
- Brake imbalance
- Tyres in poor condition
Even if it passes once, advisories are common – and those usually become failures later.
Common Mistakes We See
- Replacing one tyre and ignoring the others
- Ignoring pulling because “it’s always done that”
- Assuming alignment is the only cause
- Waiting until the MOT to deal with it
Most pulling issues are cheaper to fix early.
What We Recommend at Kinson MOT Centre
From a technician’s point of view:
- Always start with tyres and pressures
- Braking-related pulling should never be ignored
- Alignment and suspension wear go hand in hand
- Early diagnosis prevents bigger repair bills
Get It Checked Properly
At Kinson MOT Centre, we:
- Inspect tyres, brakes, suspension, and steering
- Identify the exact cause (not guess)
- Advise what’s urgent vs what can wait
- Help prevent MOT failures
- Keep you driving safely
If you’re in Bournemouth or Kinson and your car is pulling to one side, book an inspection before it becomes a bigger issue.
Straight-line driving isn’t just about comfort – it’s about control and safety.